Hydrogen peroxide silver true combination for cleaning mold: The best remedy

Hydrogen peroxide and silver for cleaning mold satisfies many criteria. An analysis of customers' priorities and wishes with regard to a highly effective anti mold remover produces quite diverse viewpoints:

  • Fast, quick effect in mold removal.
  • Non-toxic.
  • Long-term effect against mold – inhibiting new growth.
  • Odourless.
  • Easy to apply.
  • Non-combustible.
  • Not expensive.
  • Easy to obtain.
  • No side-effects.
  • Broad-spectrum effect, etc.

In a nutshell: as strong as possible, as long-lasting as possible and as non-toxic as possible. Unfortunately, however, these requirements are fundamentally mutually exclusive. The more effective and powerful a product against mold is, the more potent its ingredients need to be, which typically means that their degree of "non-toxicity" decreases. For this reason, all mold level control products are usually a compromise between effectiveness, ease of application and toxicity.

Using silver and hydrogen peroxide for cleaning mould

The simplest way to obtain an effective yet permanently non-toxic formula against mould is to rely on a substance that decomposes rapidly after it has been effective. Hydrogen peroxide meets this requirement. This disinfecting effect is based on the separation of hydroxyl radicals, which destroy the mold. At the same time, however, the hydrogen peroxide breaks down into water and oxygen
after disinfection.

This effect is further enhanced with silver. If silver is used with hydrogen peroxide for cleaning mold, the effect is about six to eight times stronger than using hydrogen peroxide mold removing substance alone. This means that you can expect the same (or an even better) effect from a 500ppm silver-enhanced 48-50% hydrogen-peroxide solution (such as QUASIL TM XXXTRA STRONG ) as from a 48-50% hydrogen peroxide solution. Silver remains on the treated surface after disinfection and inhibits re-contamination to a certain extent.

Why are silver and hydrogen peroxide so effective against mold?

Hydrogen peroxide for cleaning mould offers several advantages:

  • In addition to its disinfectant and fungicidal effect,...
  • ...the oxidative power of the released hydroxyl radicals neutralizes a large proportion of the toxins produced by the mold (depending on the species). Aflatoxin and Co. are very sensitive to oxidative substances.
  • In addition, allergenic surface proteins, such as those found in airborne mould spores, are also denatured by the hydroxyl radicals that split off from the hydrogen peroxide.
  • The mold's ability to germinate is also disrupted. This means that the spores, which become airborne when hydrogen peroxide and silver are used for mold removal, are much less problematic than they would be without prior treatment with QUASIL TM XXXTRA STRONG hydrogen peroxide silver.
  • There is also another aspect to consider: since hydrogen peroxide with silver is more effective against mold than hydrogen peroxide for removing mold alone, a lower diluted concentration is sufficient of QUASIL TM XXXTRA STRONG. This not only reduces the aggressiveness of the disinfectant on surfaces and materials, but also allows safe application AND has no bleaching effect. No bleaching effect? And that's supposed to be advantageous? Yes! This is because bleaching removes the possibility of completely removing the layer of dead mold by mechanical means. In other words, bleaching makes it possible to accidentally
    leave behind mold material on the wall, which then becomes a breeding ground for new generations of mold..

Alternatives to silver and hydrogen peroxide for cleaning mold

Of course, there are some alternatives to using silver and hydrogen peroxide to remove mold.

  1. For example, well-known agents such as chlorine or bleach are good disinfectants. However, their odour is relatively strong and lingers in the room for some time afterwards. Nevertheless, these anti mold products are sufficient for the treatment of small areas or infested joints or gaps.
  2. Alcohols such as isopropyl alcohol or spirit are also effective as anti mold cleaning products. Since alcohols evaporate quickly, they do not leave behind any harmful residues. They also cause no discoloration and are virtually odourless. This makes them highly suitable for the treatment of small areas infested with mold. However, due to the risk of fire and deflagration, they are not suitable for larger-scale jobs in the professional sector.
  3. Quaternary ammonium compounds (QACs) are also often used to combat mold. These products are relatively non-toxic, even though they are suspected of causing allergies relatively quickly. In addition, QACs such as benzalkonium chloride, etc. act selectively, i.e. they are not equally effective against all species of mold.

What is the best anti mould paint?

There is also disagreement regarding after-treatment with anti mould paint. The facts of the matter are fairly simple; mold is caused by excessive moisture on the wall. Therefore, in most cases (apart from mould occurring after water damage) a reduction of condensation will also prevent or at least hinder mould growth.

In other words, any anti mold paint is suitable as long as it is used after application/sprinkling of diluted 2% formulation of QUASIL TM XXXTRA STRONG best in the market made out with highest concentrated hydrogen peroxide with silver:

  1. is highly permeable and
  2. has a naturally high alkaline pH value. This includes all calcium silicate paints, lime paints and anti-condensate paints containing micro hollow bodies, e.g. Sanosil Paint n Dry.

By contrast, "mold-inhibiting" adjusted dispersion are less than optimal. Despite being effective against mold, their efficacy comes at the expense of the toxins they contain, which are detrimental to human health. These products therefore certainly cannot be considered as the best anti mold paint.

Professional Anti-Mould Agent Containing Hydrogen Peroxide and Silver

The proven classic. Especially popular due to its virtually odorless application.

  • Highly effective, inhibits regrowth.
  • Contains no chlorine, alcohol or Quaternary ammonium compounds.
  • Breaks down almost completely to water and oxygen after use
  • Does not produce any toxic, flammable or strong-smelling vapors


Leave a Reply

Your email address will not be published.